Replicacion

http://www.microsoft.com/resources/...amples.asp


Example 2: Force a replication event between two replication partners
The following example uses the replicate operation of RepAdmin to force the
domain directory partition for microsoft.com on Server1 to replicate with
the domain directory partition on Server2. This makes Server2 the source and
Server1 the destination server.
The required parameters for the replicate operation are the name of the
server that will receive changes (DestDC in the syntax), the name of the
directory partition (NamingContext in the syntax), and the objectGUID of the
directory partition that will send the changes (SourceDCUUID in the syntax).
Type the following at the command prompt:
repadmin /replicate server2.microsoft.com server1.microsoft.com dc=
rktlabdom,dc=com
Press Enter and the following output is displayed:

server2.microsoft.com
Sync from server1.microsoft.com to server2.microsoft.com completed
successfully.



Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Carlos Manuel del Rosario" wrote in message
news:

Negativo. lo he hecho y nada. imagino que debe ser algo asi: /sync
<Naming
Context> <Dest DSA> <Source DSA UUID> /force, lo que no conosco es lo que
debo poner en <Naming Contex> <Dest DSA> <Source DSA UUID> por eso
quiciera
ver un ejemplo.


"Ramon Jiménez" wrote in message
news:

basicamente /sync /force

Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Carlos Manuel del Rosario" wrote in message
news:%
> Hola...
> ya leí sobre el RepAdmin lo que no logro es hacerlo funcionar, si me
> pudieras graficar con un ejemplo la parte del comando /sync con sus
> argumentos te lo agradecería mucho.
> Gracias.
>
> Usage: repadmin <cmd> <args> [/u:{domain\\user}] [/pw:{password|*}]
>
> Supported <cmd>s & args:
> /sync <Naming Context> <Dest DSA> <Source DSA UUID> [/force]
> [/async
> [/full] [/addref] [/allsources]
> /syncall <Dest DSA> [<Naming Context>] [<flags>]
> /kcc [DSA] [/async]
> /bind [DSA]
> /propcheck <Naming Context> <Originating DSA Invocation ID>
> <Originating USN> [DSA from which to enumerate host DSAs]
> /getchanges NamingContext [SourceDSA] [/cookie:<file>]
> /getchanges NamingContext [DestDSA] SourceDSAObjectGuid
> [/verbose] [/statistics]
>
> /showreps [Naming Context] [DSA [Source DSA objectGuid]] [/verbose]
> [/unreplicated] [/nocache]
> /showvector <Naming Context> [DSA] [/nocache]
> /showmeta <Object DN> [DSA] [/nocache]
> /showtime <DS time value>
> /showmsg <Win32 error>
> /showism [<Transport DN>] [/verbose] (must be executed locally)
> /showsig [DSA]
> /showconn [DSA] [Container DN | <DSA guid>] (default is local site)
> /showcert [DSA]
>
> /queue [DSA]
> /failcache [DSA]
> /showctx [DSA] [/nocache]
>
> "Ramon Jiménez" wrote in message
> news:
>> Initiating Replication Between Active Directory Direct Replication
> Partners
>> http://support.microsoft.com/defaul...-us;232072
>>
>> Using Repadmin.exe to Troubleshoot Active Directory Replication
>> http://support.microsoft.com/defaul...-us;229896
>>
>>
>> Saludos
>> Ramon
>> PMP, ITIL Certified
>> MCSE & MCSA 2000/2003, CCA
>> "Carlos Manuel del Rosario" wrote in message
>> news:%
>> > Hola.
>> > Existe algun comando que me permita forzar la replicacion entre dos
>> > controladores de dominio que se encuentran en sitios diferentes.

Trato

> de
>> > hacerlo por la consola AD Sites and Service pero me dice que

replicarán

>> > cuando les toque según el schedule y lo que necesito es hacerlos
> replicar
>> > inmediatamente.
>> > Gracias de antemano.
>> >
>> >
>>
>>
>
>

Esto era para Windows 2003

Para Windows 2000
http://msdn.microsoft.com/library/d...cation.asp



Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Ramon Jiménez" wrote in message
news:

http://www.microsoft.com/resources/...amples.asp


Example 2: Force a replication event between two replication partners
The following example uses the replicate operation of RepAdmin to force
the domain directory partition for microsoft.com on Server1 to replicate
with the domain directory partition on Server2. This makes Server2 the
source and Server1 the destination server.
The required parameters for the replicate operation are the name of the
server that will receive changes (DestDC in the syntax), the name of the
directory partition (NamingContext in the syntax), and the objectGUID of
the directory partition that will send the changes (SourceDCUUID in the
syntax).
Type the following at the command prompt:
repadmin /replicate server2.microsoft.com server1.microsoft.com dc=
rktlabdom,dc=com
Press Enter and the following output is displayed:

server2.microsoft.com
Sync from server1.microsoft.com to server2.microsoft.com completed
successfully.



Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Carlos Manuel del Rosario" wrote in message
news:

Negativo. lo he hecho y nada. imagino que debe ser algo asi: /sync
<Naming
Context> <Dest DSA> <Source DSA UUID> /force, lo que no conosco es lo que
debo poner en <Naming Contex> <Dest DSA> <Source DSA UUID> por eso
quiciera
ver un ejemplo.


"Ramon Jiménez" wrote in message
news:

basicamente /sync /force

Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Carlos Manuel del Rosario" wrote in message
news:%
> Hola...
> ya leí sobre el RepAdmin lo que no logro es hacerlo funcionar, si me
> pudieras graficar con un ejemplo la parte del comando /sync con sus
> argumentos te lo agradecería mucho.
> Gracias.
>
> Usage: repadmin <cmd> <args> [/u:{domain\\user}] [/pw:{password|*}]
>
> Supported <cmd>s & args:
> /sync <Naming Context> <Dest DSA> <Source DSA UUID> [/force]
> [/async
> [/full] [/addref] [/allsources]
> /syncall <Dest DSA> [<Naming Context>] [<flags>]
> /kcc [DSA] [/async]
> /bind [DSA]
> /propcheck <Naming Context> <Originating DSA Invocation ID>
> <Originating USN> [DSA from which to enumerate host DSAs]
> /getchanges NamingContext [SourceDSA] [/cookie:<file>]
> /getchanges NamingContext [DestDSA] SourceDSAObjectGuid
> [/verbose] [/statistics]
>
> /showreps [Naming Context] [DSA [Source DSA objectGuid]]
> [/verbose]
> [/unreplicated] [/nocache]
> /showvector <Naming Context> [DSA] [/nocache]
> /showmeta <Object DN> [DSA] [/nocache]
> /showtime <DS time value>
> /showmsg <Win32 error>
> /showism [<Transport DN>] [/verbose] (must be executed locally)
> /showsig [DSA]
> /showconn [DSA] [Container DN | <DSA guid>] (default is local
> site)
> /showcert [DSA]
>
> /queue [DSA]
> /failcache [DSA]
> /showctx [DSA] [/nocache]
>
> "Ramon Jiménez" wrote in message
> news:
>> Initiating Replication Between Active Directory Direct Replication
> Partners
>> http://support.microsoft.com/defaul...-us;232072
>>
>> Using Repadmin.exe to Troubleshoot Active Directory Replication
>> http://support.microsoft.com/defaul...-us;229896
>>
>>
>> Saludos
>> Ramon
>> PMP, ITIL Certified
>> MCSE & MCSA 2000/2003, CCA
>> "Carlos Manuel del Rosario" wrote in message
>> news:%
>> > Hola.
>> > Existe algun comando que me permita forzar la replicacion entre dos
>> > controladores de dominio que se encuentran en sitios diferentes.

Trato

> de
>> > hacerlo por la consola AD Sites and Service pero me dice que

replicarán

>> > cuando les toque según el schedule y lo que necesito es hacerlos
> replicar
>> > inmediatamente.
>> > Gracias de antemano.
>> >
>> >
>>
>>
>
>

Otro ejemplo...

Possible Active Directory Inconsistency After You Restore a Domain
Controller
http://support.microsoft.com/defaul...-US;316829


Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Ramon Jiménez" wrote in message
news:

http://www.microsoft.com/resources/...amples.asp


Example 2: Force a replication event between two replication partners
The following example uses the replicate operation of RepAdmin to force
the domain directory partition for microsoft.com on Server1 to replicate
with the domain directory partition on Server2. This makes Server2 the
source and Server1 the destination server.
The required parameters for the replicate operation are the name of the
server that will receive changes (DestDC in the syntax), the name of the
directory partition (NamingContext in the syntax), and the objectGUID of
the directory partition that will send the changes (SourceDCUUID in the
syntax).
Type the following at the command prompt:
repadmin /replicate server2.microsoft.com server1.microsoft.com dc=
rktlabdom,dc=com
Press Enter and the following output is displayed:

server2.microsoft.com
Sync from server1.microsoft.com to server2.microsoft.com completed
successfully.



Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Carlos Manuel del Rosario" wrote in message
news:

Negativo. lo he hecho y nada. imagino que debe ser algo asi: /sync
<Naming
Context> <Dest DSA> <Source DSA UUID> /force, lo que no conosco es lo que
debo poner en <Naming Contex> <Dest DSA> <Source DSA UUID> por eso
quiciera
ver un ejemplo.


"Ramon Jiménez" wrote in message
news:

basicamente /sync /force

Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Carlos Manuel del Rosario" wrote in message
news:%
> Hola...
> ya leí sobre el RepAdmin lo que no logro es hacerlo funcionar, si me
> pudieras graficar con un ejemplo la parte del comando /sync con sus
> argumentos te lo agradecería mucho.
> Gracias.
>
> Usage: repadmin <cmd> <args> [/u:{domain\\user}] [/pw:{password|*}]
>
> Supported <cmd>s & args:
> /sync <Naming Context> <Dest DSA> <Source DSA UUID> [/force]
> [/async
> [/full] [/addref] [/allsources]
> /syncall <Dest DSA> [<Naming Context>] [<flags>]
> /kcc [DSA] [/async]
> /bind [DSA]
> /propcheck <Naming Context> <Originating DSA Invocation ID>
> <Originating USN> [DSA from which to enumerate host DSAs]
> /getchanges NamingContext [SourceDSA] [/cookie:<file>]
> /getchanges NamingContext [DestDSA] SourceDSAObjectGuid
> [/verbose] [/statistics]
>
> /showreps [Naming Context] [DSA [Source DSA objectGuid]]
> [/verbose]
> [/unreplicated] [/nocache]
> /showvector <Naming Context> [DSA] [/nocache]
> /showmeta <Object DN> [DSA] [/nocache]
> /showtime <DS time value>
> /showmsg <Win32 error>
> /showism [<Transport DN>] [/verbose] (must be executed locally)
> /showsig [DSA]
> /showconn [DSA] [Container DN | <DSA guid>] (default is local
> site)
> /showcert [DSA]
>
> /queue [DSA]
> /failcache [DSA]
> /showctx [DSA] [/nocache]
>
> "Ramon Jiménez" wrote in message
> news:
>> Initiating Replication Between Active Directory Direct Replication
> Partners
>> http://support.microsoft.com/defaul...-us;232072
>>
>> Using Repadmin.exe to Troubleshoot Active Directory Replication
>> http://support.microsoft.com/defaul...-us;229896
>>
>>
>> Saludos
>> Ramon
>> PMP, ITIL Certified
>> MCSE & MCSA 2000/2003, CCA
>> "Carlos Manuel del Rosario" wrote in message
>> news:%
>> > Hola.
>> > Existe algun comando que me permita forzar la replicacion entre dos
>> > controladores de dominio que se encuentran en sitios diferentes.

Trato

> de
>> > hacerlo por la consola AD Sites and Service pero me dice que

replicarán

>> > cuando les toque según el schedule y lo que necesito es hacerlos
> replicar
>> > inmediatamente.
>> > Gracias de antemano.
>> >
>> >
>>
>>
>
>

Perfecto.
Muchas Gracias..

"Ramon Jiménez" wrote in message
news:

Otro ejemplo...

Possible Active Directory Inconsistency After You Restore a Domain
Controller
http://support.microsoft.com/defaul...-US;316829


Saludos
Ramon
PMP, ITIL Certified
MCSE & MCSA 2000/2003, CCA
"Ramon Jiménez" wrote in message
news:
>

http://www.microsoft.com/resources/...amples.asp

>
>
> Example 2: Force a replication event between two replication partners
> The following example uses the replicate operation of RepAdmin to force
> the domain directory partition for microsoft.com on Server1 to replicate
> with the domain directory partition on Server2. This makes Server2 the
> source and Server1 the destination server.
> The required parameters for the replicate operation are the name of the
> server that will receive changes (DestDC in the syntax), the name of the
> directory partition (NamingContext in the syntax), and the objectGUID of
> the directory partition that will send the changes (SourceDCUUID in the
> syntax).
> Type the following at the command prompt:
> repadmin /replicate server2.microsoft.com server1.microsoft.com dc> > rktlabdom,dc=com
> Press Enter and the following output is displayed:
>
> server2.microsoft.com
> Sync from server1.microsoft.com to server2.microsoft.com completed
> successfully.
>
>
>
> Saludos
> Ramon
> PMP, ITIL Certified
> MCSE & MCSA 2000/2003, CCA
> "Carlos Manuel del Rosario" wrote in message
> news:
>> Negativo. lo he hecho y nada. imagino que debe ser algo asi: /sync
>> <Naming
>> Context> <Dest DSA> <Source DSA UUID> /force, lo que no conosco es lo

que

>> debo poner en <Naming Contex> <Dest DSA> <Source DSA UUID> por eso
>> quiciera
>> ver un ejemplo.
>>
>>
>> "Ramon Jiménez" wrote in message
>> news:
>>> basicamente /sync /force
>>>
>>> Saludos
>>> Ramon
>>> PMP, ITIL Certified
>>> MCSE & MCSA 2000/2003, CCA
>>> "Carlos Manuel del Rosario" wrote in message
>>> news:%
>>> > Hola...
>>> > ya leí sobre el RepAdmin lo que no logro es hacerlo funcionar, si me
>>> > pudieras graficar con un ejemplo la parte del comando /sync con sus
>>> > argumentos te lo agradecería mucho.
>>> > Gracias.
>>> >
>>> > Usage: repadmin <cmd> <args> [/u:{domain\\user}] [/pw:{password|*}]
>>> >
>>> > Supported <cmd>s & args:
>>> > /sync <Naming Context> <Dest DSA> <Source DSA UUID> [/force]
>>> > [/async
>>> > [/full] [/addref] [/allsources]
>>> > /syncall <Dest DSA> [<Naming Context>] [<flags>]
>>> > /kcc [DSA] [/async]
>>> > /bind [DSA]
>>> > /propcheck <Naming Context> <Originating DSA Invocation ID>
>>> > <Originating USN> [DSA from which to enumerate host DSAs]
>>> > /getchanges NamingContext [SourceDSA] [/cookie:<file>]
>>> > /getchanges NamingContext [DestDSA] SourceDSAObjectGuid
>>> > [/verbose] [/statistics]
>>> >
>>> > /showreps [Naming Context] [DSA [Source DSA objectGuid]]
>>> > [/verbose]
>>> > [/unreplicated] [/nocache]
>>> > /showvector <Naming Context> [DSA] [/nocache]
>>> > /showmeta <Object DN> [DSA] [/nocache]
>>> > /showtime <DS time value>
>>> > /showmsg <Win32 error>
>>> > /showism [<Transport DN>] [/verbose] (must be executed locally)
>>> > /showsig [DSA]
>>> > /showconn [DSA] [Container DN | <DSA guid>] (default is local
>>> > site)
>>> > /showcert [DSA]
>>> >
>>> > /queue [DSA]
>>> > /failcache [DSA]
>>> > /showctx [DSA] [/nocache]
>>> >
>>> > "Ramon Jiménez" wrote in message
>>> > news:
>>> >> Initiating Replication Between Active Directory Direct Replication
>>> > Partners
>>> >> http://support.microsoft.com/defaul...-us;232072
>>> >>
>>> >> Using Repadmin.exe to Troubleshoot Active Directory Replication
>>> >> http://support.microsoft.com/defaul...-us;229896
>>> >>
>>> >>
>>> >> Saludos
>>> >> Ramon
>>> >> PMP, ITIL Certified
>>> >> MCSE & MCSA 2000/2003, CCA
>>> >> "Carlos Manuel del Rosario" wrote in message
>>> >> news:%
>>> >> > Hola.
>>> >> > Existe algun comando que me permita forzar la replicacion entre

dos

>>> >> > controladores de dominio que se encuentran en sitios diferentes.
>> Trato
>>> > de
>>> >> > hacerlo por la consola AD Sites and Service pero me dice que
>> replicarán
>>> >> > cuando les toque según el schedule y lo que necesito es hacerlos
>>> > replicar
>>> >> > inmediatamente.
>>> >> > Gracias de antemano.
>>> >> >
>>> >> >
>>> >>
>>> >>
>>> >
>>> >
>>>
>>>
>>
>>
>
>